|
|
Post by haironimus on Jan 7, 2014 12:50:36 GMT -5
Not sure if anyone's posted about this already, apologies for the new thread if this is the case.
Just this evening finally decided to have a look at the Ninja Master's card and to my dismay, my X doesn't seem to be picking it up.
Firmware is still v370 as my megapack's still in the post.
Was just wondering if anyone else has had this issue, and if so, is it just the NM card that's not working as would hate to have it not see the megapack card.
|
|
|
|
Post by a16cpu on Jan 7, 2014 14:38:02 GMT -5
Not sure if anyone's posted about this already, apologies for the new thread if this is the case. Just this evening finally decided to have a look at the Ninja Master's card and to my dismay, my X doesn't seem to be picking it up. Firmware is still v370 as my megapack's still in the post. Was just wondering if anyone else has had this issue, and if so, is it just the NM card that's not working as would hate to have it not see the megapack card. Hi, I had the same problem with mine. I contacted the supplier (FunStock) and got a replacement card sent out. |
|
|
|
Post by haironimus on Jan 7, 2014 15:54:32 GMT -5
Ah so some of the cards are duds then.
I bought my x through amazon.co.uk. I wonder if funstock will sort me out?
Thanks anyway a16.
|
|
|
|
Post by steryan on Jan 7, 2014 23:07:59 GMT -5
Clean the contacts with a lint free cloth/glasses rag and bend the cartridge very carefully (Don't break the thing) in the middle so the pins will definitely make contact, I did this and mine has worked ever since.
|
|
|
|
Post by omgngx on Jan 8, 2014 3:34:53 GMT -5
I had "flexed" one of my Ninja Master's game cards and this broke it  . When I opened it up i saw how (literally) paper thin the pcb was and noticed that some of the solder points underneath the flash chip had snapped. So you probably have one that broke as it can happen pretty easily. |
|
|
|
Post by haironimus on Jan 8, 2014 4:14:45 GMT -5
Thanks lads.
I'll try and see if blaze, funstock, amazon...whoever will give me a replacement first, then i might try Steryan's idea.
|
|
|
|
Post by a16cpu on Jan 8, 2014 9:40:25 GMT -5
Thanks lads. I'll try and see if blaze, funstock, amazon...whoever will give me a replacement first, then i might try Steryan's idea. I'm sure Amazon will replace it if it's faulty. I bought mine from Funstock July / August last year and when I contacted them about it they said it was a "known issue with the Ninja Master game card not working with a small percentage of the newer consoles and the manufacturers are already working on a new version of the game card that will fix the issue"
I got the replacement card a few days after getting in contact, so it all worked out ok. Anyway I was far to busy playing Metal Slug on it to give any other game a look in  Hope you get it sorted |
|
|
|
Post by haironimus on Jan 8, 2014 12:09:35 GMT -5
Cheers man, gonna get in touch about it this evening so hopefully you're right.
|
|
|
|
Post by steryan on Jan 12, 2014 10:26:29 GMT -5
Cheers man, gonna get in touch about it this evening so hopefully you're right. Did you get it sorted mate? |
|
|
|
Post by haironimus on Jan 12, 2014 12:37:00 GMT -5
I actually got in touch with Blaze instead of Amazon.
They were helpful enough.
When I told them I was on v370 but would have the megapack Monday , they advised that I should try the update
To v500 first, and if the card still isn't working then to get back in touch, presumably so they can issue a replacement.
Not sure what they would've said if I hadn't mentioned the megapack.
But I guess we'll see how it all goes tomorrow.
|
|
|
|
Post by haironimus on Jan 13, 2014 6:29:30 GMT -5
Just a quick update to this. Megapack arrived this morning, box had been opened to put the 500a firmware update in. Update went flawlessly after which Ninja master's works, so all good |
|
|
|
Post by a16cpu on Jan 13, 2014 11:37:31 GMT -5
Just a quick update to this. Megapack arrived this morning, box had been opened to put the 500a firmware update in. Update went flawlessly after which Ninja master's works, so all good Cool, Glad it's all up and working. Just a few stick mods to do now then |
|
|
|
Post by haironimus on Jan 13, 2014 12:04:33 GMT -5
Just a quick update to this. Megapack arrived this morning, box had been opened to put the 500a firmware update in. Update went flawlessly after which Ninja master's works, so all good Cool, Glad it's all up and working. Just a few stick mods to do now then Yup, that'll definitely be happening in the near future. |
|
|
|
Post by wilsonrabellojr on Jan 24, 2014 14:52:24 GMT -5
Hi Everyone,
For me there is a quite different problem...Ninja Masters has ran like a charm before apply the Jailbreak; however, after apply the hack my Neo Geo X was simply unable to open Ninja MAster´s game card, despite right icon appears on the screen....have someone faced the same issue? I just had an *.AES image generated for Ninja Masters and added into my HomeBrew SD X-Card, but, if there are any ways to keep up with Original Ninja MAsters SD Card that will be awesome.
Any thoughts?
|
|
danthor
Global Moderator 
Posts: 306 
|
Post by danthor on Jan 24, 2014 15:07:02 GMT -5
It could be like the Mega Pack, which is also unusable after Jailbreak, but I don't know that for sure. I never actually tried my Ninja Master's card after jailbreak, I just keep a copy on my card!
|
|
. When I opened it up i saw how (literally) paper thin the pcb was and noticed that some of the solder points underneath the flash chip had snapped. So you probably have one that broke as it can happen pretty easily.
