|
|
Post by wendal on Sept 22, 2014 20:28:35 GMT -5
I got my Procard from omgsnk, jailbroke from 337, and had everything running (Neo Geo games and emulators).
I was playing a few weeks ago, turned off the handheld, and put it in the console case.
I picked it up today, and the built in games work fine, but the Game Card icon doesn't load when I press A. Nothing happens. Any ideas?
By the way, the battery is full.
Thanks.
|
|
danthor
Global Moderator 
Posts: 306 
|
Post by danthor on Sept 23, 2014 8:54:35 GMT -5
Sometimes you need to take the card out, and re-insert it for it to register. Not really sure why, just that sometimes, the fix is this simple.
|
|
|
|
Post by wendal on Sept 23, 2014 16:02:08 GMT -5
Thanks for your reply. I tried cleaning the contacts with contact cleaner, but it had no effect. The OS detects the ProCard, but pressing A does nothing. I'll try taking it apart tonight. It's possible that there is a data pin that lost contact, but it shouldn't be the case because this is the only card I've ever put into the handheld and never took it out (aside from switching the MicroSD for the flash).
|
|
|
|
Post by wendal on Oct 28, 2014 14:40:13 GMT -5
Figured this out. I was able to borrow a friend's ProCard to verify that it was the fault point, but now I have no way of playing anything but the built in games because it's on jailbroken firmware. The ProCard that I got from omgngk stopped working. I was able to open it up and noticed that the wire work was super shoddy. The bridge between pins 2 and 8 had lost connection because the solder or glue didn't hold. Everything was filled with glue and it was obvious where the soldering iron had melted plastic inside.
Anyone know where to get a good card without any accessories?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 28, 2014 18:26:08 GMT -5
I have sent you a PM
|
|
|
|
Post by wendal on Oct 29, 2014 9:58:47 GMT -5
Thanks for the info. I ordered from superufo.
|
|
|
|
Post by omgngx on Jan 26, 2015 1:48:00 GMT -5
Thanks for the info. I ordered from superufo. Why didn't you contact me?  My bad, I should've kept a better eye on these boards... you could've sent it back to me for a replacement if you didn't take it apart... The offer stands for a replacement if you didn't actually disassemble it... PM me. |
|
My bad, I should've kept a better eye on these boards... you could've sent it back to me for a replacement if you didn't take it apart... The offer stands for a replacement if you didn't actually disassemble it... PM me.